Hernon ReAct® 727 Acrylic Adhesive, 1L Volume
Hernon ReAct® 727 Acrylic Adhesive, 1L Volume
SKU:ACR-d237af
Secure ceramic magnets with strength & flexibility using Hernon ReAct® 727 Acrylic Adhesive. Ideal for motors & structural bonding.
Regular price
$45.99
Regular price
Sale price
$45.99
Unit price
per
Initiate Order
Hernon ReAct® 727 Acrylic Adhesive, 1L Volume
$45.99
Quantity: 1
Claim Your Seller Account
Hernon ReAct® 727 Acrylic Adhesive, 1L Volume
$45.99
Quantity: 1
Delivery via Maden
Expect your order to arrive on time.
Secure Payments
All orders are processed through a secure, PCI-compliant checkout.
The Hernon ReAct® 727 Acrylic Adhesive in a 1-liter volume is specifically formulated for securing ceramic permanent magnet segments in motor magnet bonding applications. With high tensile strength and excellent flexibility, this adhesive ensures tough, durable bonds with outstanding impact and peel resistance. Its room temperature curing property, when used with Hernon® Activator 56, offers versatile performance capabilities, making it ideal for various structural bonding applications.
Product Specifications
Benefits Cost Effective
Requires minimal clamping time and tooling.Eliminates high energy cost needed for heat cured materials.Eliminates need for mechanical clips
Benefits Improved Processing
Fast fixturingNo pot life, no mixingNo waste problemsLow toxicityLow odorThixotropic: facilitates dispensing/applyingNon-migrating on vertical surfacesIncreases productivityRequires minimal parts cleaningEasy clean-up
Benefits Improved Reliability
High impact and shock resistanceGood gap filling properties.Excellent adhesion to a variety of surfaces.Consistent rate of cure from 60 to 100 ºF (16 to 38 ºC)Consistent bond strength
Directions For Use Directions For Use
For best performance bond surfaces should be clean and free from grease.To ensure a fast and reliable cure, Activator 56 should be applied to one of the bond surfaces and the adhesive to the other surface. Parts should be assembled within 15 minutes.The recommended bond line gap is 0.1mm. Where bond gaps are large (up to a maximum of 0.5 mm), or faster cure speed is required, Activator 56 should be applied to both surfaces. Parts should be assembled immediately (within 1 minute).Excess adhesive can be wiped away with organic solvent.Bond should be held clamped until adhesive has fixtured.Product should be allowed to develop full strength before subjecting to any service loads (typically 24 to 72 hours after assembly, depending on bond gap, materials and ambient conditions)
Dispensing Equipment Dispensing Equipment
Hernon® offers a complete line of semi and fully automated dispensing equipment.
General Information General Information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.Where aqueous washing systems are used to clean the surfaces before bonding, it is important to check for compatibility of the washing solution with the adhesive. In some cases these aqueous washes can affect the cue and performance of the adhesive.This product is not normally recommended for use on plastics (particularly thermoplastic materials where stress cracking of the plastic could result). It is recommended to confirm compatibility of the product with such substrates.
Note Note
These suggestions and data are based on information we believe to be reliable and accurate, but no guarantee of their accuracy is made. Hernon manufacturing®, inc. shall not be liable for any damage, loss or injury, direct or consequential arising out of the use or the inability to use the product. in every case, we urge and recommend that purchasers, before using any product in full scale production, make their own tests to determine whether the product is of satisfactory quality and suitability for their operations, and the user assumes all risk and liability whatsoever, in connection therewith. hernon's quality management system for the design and manufacture of high-performance adhesives and sealants is registered to the ISO 9001 quality standard.
Storage Storage
ReAct® 727 should be stored in a cool, dry location in unopened containers at a temperature between 45ºF to 85ºF (7ºC to 29ºC) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused material, do not return any material to its original container.
Technical Specs Brands
Hernon Manufacturing, Inc
Technical Specs Industry Standards
International Organization for Standardization (ISO-9001)
Technical Specs Substrates
Magnets | Metal | Plastic
Technical Specs Volume
1 L
Applications Applications
DC motor assembly.Magnet bonding.Bonding pre-coated sheet metal.Bonding ferrites, plastic, and metal wear strips.Bonding metals with special surface treatments such as galvanized, phosphate, and dichromate surfaces
Properties Uncured Appearance
Off-White | Translucent
Properties Uncured Base Resin
Modified Acrylic
Properties Uncured Specific Viscosity At 25 Degree Celsi
1.08
Properties Uncured Viscosity At 25 Degree Celsius C Temp
56,000 to 64,000 cP