0.125 Inch Inconel 625 Alloy Sheet
0.125 Inch Inconel 625 Alloy Sheet
SKU:INC-142fcf
High-strength 0.125-inch Inconel 625 Alloy Sheet with exceptional corrosion resistance at extreme temperatures. Ideal for various industrial applications.
Regular price
$99.99
Regular price
Sale price
$99.99
Unit price
per
Initiate Order
0.125 Inch Inconel 625 Alloy Sheet
$99.99
Quantity: 1
Claim Your Seller Account
0.125 Inch Inconel 625 Alloy Sheet
$99.99
Quantity: 1
Delivery via Maden
Expect your order to arrive on time.
Secure Payments
All orders are processed through a secure, PCI-compliant checkout.
The 0.125-inch Inconel 625 Alloy Sheet offers exceptional strength and toughness from cryogenic to high temperatures, with good oxidation and corrosion resistance. Ideal for chemical and pollution control equipment, nuclear reactors, marine components, and more. Resistant to pitting, crevice, and corrosion cracking, this alloy excels in various organic and mineral acid environments. With high temperature strength and superior mechanical properties, it meets stringent industry standards for reliability and durability.
Ready to Grow Without Cash Flow Constraints?
Product Specifications
Applications 0
Components where exposure to sea water and high mechanical stresses are required.Oil and gas production where hydrogen sulfide and elementary sulfur exist at temperature in excess of 150 ºC.Components exposed to flue gas or in flue gas desulfurization plants.Flare stacks on offshore oil platforms.Hydrocarbon processing from tar-sand and oil-shale recovery projects.
Characteristics 0
Excellent mechanical properties at both extremely low and extremely high temperatures.Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion.Almost complete freedom from chloride induced stress corrosion cracking.High resistance to oxidation at elevated temperatures up to 1050 ºC.Good resistance to acids, such as nitric, phosphoric, sulfuric and hydrochloric, as well as to alkalis makes possible the construction of thin structural parts of high heat transfer.
General Resistance Barrod Usa
B446
General Resistance Barrod Wkstf
17752
General Resistance Fitting Usa
B366
General Resistance Forging Usa
B564
General Resistance Forging Wkstf
17554
General Resistance General Resistance
Temperature | Oxidation
General Resistance Sheetplate Usa
B443
General Resistance Sheetplate Wkstf
17750
General Resistance Unified Numbering System Uns
N06625
General Resistance Weld Electrode
ENiCrMo-3
General Resistance Weld Wire
ERNiCrMo-3
General Resistance Werkstof
2.4856
Machinability Ratings Note
These machinability ratios must be recognized as approximate values. They are a reasonable guide to relative tool life and lower required for cutting. It is obvious, however, that variables of speed, cutting oil, feed and depth of cut will significantly affect these ratios.
Machinability Ratings Speed Percent Of B1112
24
Machinability Ratings Speed Surface
40 ft/mm
Machining Section 0
The alloys described here work harden rapidly during machining and require more power to cut than do the plain carbon steels. The metal is 'gummy', with chips that tend to be stringy and tough. Machine tools should be rigid and used to no more than 75% of their rated capacity. Both work piece and tool should be held rigidly; tool overhang should be minimized. Rigidity is particularly important when machining titanium, as titanium has a much lower modulus of elasticity than either steel or nickel alloys. Slender work pieces of titanium tend to deflect under tool pressures causing chatter, tool rubbing and tolerance problems.Make sure that tools are always sharp. Change to sharpened tools at regular intervals rather than out of necessity. Titanium chips in particular tend to gall and weld to the tool cutting edges, speeding up tool wear and failure. Remember- cutting edges, particularly throw-away inserts, are expendable. Don't trade dollars in machine time for pennies in tool cost.Feed rate should be high enough to ensure that the tool cutting edge is getting under the previous cut thus avoiding work-hardened zones. Slow speeds are generally required with heavy cuts. Sulfur chlorinated petroleum oil lubricants are suggested for all alloys but titanium. Such lubricants may be thinned with paraffin oil for finish cuts at higher speeds. The tool should not ride on the work piece as this will work harden the material and result in early tool dulling or breakage. Use an air jet directed on the tool when dry cutting, to significantly increase tool life.Lubricants or cutting fluids for titanium should be carefully selected. Do not use fluids containing chlorine or other halogens (fluorine, bromine or iodine), in order to avoid risk of corrosion problems. The speeds are for single point turning operations using high speed steel tools. This information is provided as a guide to relative machinability, higher speeds are used with carbide tooling.
Mechanical Elongation
55 to 30 %
Mechanical Hardness
145 to 220
Mechanical Mechanical Type
Annealed
Mechanical Tensile Strength
120 to 150 ksi
Mechanical Yield Strength
60 to 90 ksi
Nominal Chemistry Chromium Cr
20.0 to 23.0
Nominal Chemistry Cobalt Co
1
Nominal Chemistry Maximum Aluminum Al
0.40
Nominal Chemistry Maximum Carbon C
0.10
Nominal Chemistry Maximum Iron Fe
5.0
Nominal Chemistry Maximum Manganese Mn
0.5
Nominal Chemistry Maximum Silicon Si
0.5
Nominal Chemistry Maximum Titanium Ti
0.40
Nominal Chemistry Molybdenum Mo
8.0 to 10.0
Nominal Chemistry Nickel Ni
58
Nominal Chemistry Other
Nb+Ta 3.15 - 4.15
Physical Curie Temperature
<-320 ºF
Physical Density
0.305 lb/in³
Physical Electrical Resistivity
794 ohm/cir-mil-ft
Physical Melting Range
2350 to 2460 ºF
Physical Specific Heat
0.102 Btu/lb ºF
Specifications Size
0.125 in