Hernon HASA 716 Anaerobic Adhesive, 10L Volume
Hernon HASA 716 Anaerobic Adhesive, 10L Volume
SKU:ANA-916677
High-performance anaerobic adhesive with 10L volume, ISO-9001 compliant for strong bonds in high-temperature applications.
Regular price
$299.99
Regular price
Sale price
$299.99
Unit price
per
Initiate Order
Hernon HASA 716 Anaerobic Adhesive, 10L Volume
$299.99
Quantity: 1
Claim Your Seller Account
Hernon HASA 716 Anaerobic Adhesive, 10L Volume
$299.99
Quantity: 1
Delivery via Maden
Expect your order to arrive on time.
Secure Payments
All orders are processed through a secure, PCI-compliant checkout.
Hernon HASA 716, with a volume of 10 liters, is a high-performance single-component anaerobic adhesive for bonding rigid assemblies at elevated temperatures. Formulated to meet ISO-9001 standards, this adhesive offers a room temperature cure, 100% active material with no solvents, and easy clean-up. Ideal for bonding ferrite to metals, glass, ceramics, and applications requiring fast-setting adhesives with high structural strength.
Product Specifications
Benefits Benefits
Single component, ready to use adhesive.Room temperature cure.100% active material, no solvents.Easy clean-up. Wipe uncured adhesive from outer surfaces.
Directions For Use Directions For Use
For best performance, bond surfaces should be clean and free of grease.To ensure a fast and reliable cure, Primer 50 should be applied to one of the bond surfaces and the adhesive to the other surface. Parts should be assembled within 15 minutes.The recommended bondline gap is 0.1 mm. Where bond gaps are large, (up to a maximum of 0.5mm), or faster cure speed is required, activator should be applied to both surfaces. Parts should be assembled immediately, (within 1 minute).Excess adhesive can be wiped away with organic solvent.Bond should be held clamped until adhesive has fixture.Product should be allowed to develop full strength before subjecting to any service loads, (typically 24 to 72 hours after assembly depending on bond gap and materials).
Dispensing Equipment Dispensing Equipment
Hernon® offers a complete line of semi and fully automated dispensing equipment.
Dispensing Equipment Recommended Applications
Automotive Applications | Bonding Flywheels | Elevators | Furniture | Generators | Permanent Motor Magnets | Sensors | Speakers
General Information General Information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.Where aqueous washing systems are used to clean the surfaces before bonding, it is important to check for compatibility of the washing solution with the adhesive. In some cases these aqueous washes can affect the cue and performance of the adhesive.This product is not normally recommended for use on plastics (particularly thermoplastic materials where stress cracking of the plastic could result). It is recommended to confirm compatibility of the product with such substrates.
Note Note
These suggestions and data are based on information we believe to be reliable and accurate, but no guarantee of their accuracy is made. Hernon manufacturing®, inc. shall not be liable for any damage, loss or injury, direct or consequential arising out of the use or the inability to use the product. in every case, we urge and recommend that purchasers, before using any product in full scale production, make their own tests to determine whether the product is of satisfactory quality and suitability for their operations, and the user assumes all risk and liability whatsoever, in connection therewith. hernon's quality management system for the design and manufacture of high-performance adhesives and sealants is registered to the ISO 9001 quality standard.
Storage Storage
HASA 716 should be stored in a cool, dry location in unopened containers at a temperature between 45ºF to 85ºF (7ºC to 29ºC) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused material, do not return any material to its original container.
Technical Specs Brands
Hernon Manufacturing, Inc
Technical Specs Industry Standards
International Organization for Standardization (ISO-9001)
Technical Specs Substrates
Magnets | Metal | Plastic
Technical Specs Volume
10 L
Applications Applications
Bonding ferrite to plated metals in electric motors and loud speakers.Bonding of glass and ceramics.Where fast setting of adhesives with high structural properties is required.
Properties Cured Coefficient Of Thermal Conductivity
0.40 W/m·K
Properties Cured Coefficient Of Thermal Expansion K 1 Af
18 x 10-5
Properties Cured Coefficient Of Thermal Expansion K 1 Be
5.6 x 10-5
Properties Cured Glass Transition Temperature Tg
102 ºC
Properties Cured Test Method For Coefficient Of Thermal
American Society for Testing and Materials (ASTM) D696
Properties Uncured Appearance
Amber Liquid
Properties Uncured Chemical Type
Modified Urethane
Properties Uncured Specific Viscosity At 25 Degree Celsi
1.11
Properties Uncured Viscosity At 25 Degree Celsius C Temp
2,800 to 3,200 cP