MD® 200 Series UV Catheter Adhesive
MD® 200 Series UV Catheter Adhesive
SKU:MDC-796f6a
MD® 200 Series UV Catheter Adhesive for quick, biocompatible bonding in catheter assembly. Cures in seconds with UV/Visible/LED light. Meets ISO 10993 standards.
Regular price
$29.99
Regular price
Sale price
$29.99
Unit price
per
Initiate Order
MD® 200 Series UV Catheter Adhesive
$29.99
Quantity: 1
Claim Your Seller Account
MD® 200 Series UV Catheter Adhesive
$29.99
Quantity: 1
Delivery via Maden
Expect your order to arrive on time.
Secure Payments
All orders are processed through a secure, PCI-compliant checkout.
The MD® 200 Series 55 cP Nominal Viscosity CTH Adhesive is specially designed for catheter assembly, curing within seconds with UV/Visible or LED light. This adhesive meets ISO 10993 standards and is compatible with sterilization methods like EtO, E-Beam, and gamma. With formulations featuring See-Cure, Ultra-Red®, or Encompass® technologies, it allows for easy verification and secondary heat-cure capability. Ideal for bonding substrates like ABS, PA, stainless steel, and more, this adhesive ensures fast processing, lower costs, and biocompatibility for medical device applications.
Ready to Grow Without Cash Flow Constraints?
Product Specifications
Additional Information 0
Dymax® MD® Adhesives, specially formulated for disposable medical device assembly, are used in a wide range of applications including catheter, syringe, anesthesia mask, reservoir, tube set, and medical electronics assembly. They help optimize assembly speeds to enable faster processing, greater output, and lower processing costs while allowing for 100% in-line inspection of bond lines. All of our adhesives are no solvents added and meet both USP Class VI and ISO 10993 biocompatibility standards.MD® adhesives are intended for use in short-term (<29 days) or single-use disposable-device applications only. Dymax® does not authorize their use in long-term implant applications. In all cases, it's the user's responsibility to determine and validate the suitability of these adhesives in the intended medical device.Compatible sterilization methods include gamma irradiation and ethylene oxide. Sterilization by autoclaving may be limited to certain applications. It remains the user's obligation to ascertain the effect of sterilization on the cured adhesive.Cure in seconds with UV/Visible/LED lightNo solvents addedOne-part formulations and no mixingISO 10993 and other biocompatible approvalsFormulations with See-Cure, Ultra-Red®, or Encompass® technologiesSecondary heat-cure capability for shadow areasBond a broad range of substrates including Nylon 12 and PEBA
Available Grades Fluorescing
Blue
Available Grades Rheology
Newtonian
Cured Mechanical Properties Durometer Hardness
D85
Cured Mechanical Properties Elongation At Break
7 %
Cured Mechanical Properties Modulus Of Elasticity
640 MPa | 93,000 psi
Cured Mechanical Properties Tensile At Break
32 MPa | 4,600 psi
Note 0
Individual Product Data Sheets (PDS) list complete test data, with copies of test reports available upon request.
Recommended Adhesives Recommended Adhesives
Acrylonitrile-Butadiene-Styrene (ABS) | Nickel Titanium (NiTi) | Polyamide (Nylon 6/6) (PA) | Polyether Block Amide (PEBA) | Polyetherimide (PEI) | Polystyrene (PS) | Polysulfone (PSU) | Polyurethane (PU) | Silicone (SIL) | Styrene-Acrylonitrile (SAN)
Recommended Substrates Recommended Substrates
Acrylonitrile Butadiene Styrene (ABS) | Nickel Titanium (NiTi) | Polystyrene (PS) | Polysulfone (PSU)
Uncured Properties Nominal Viscosity
55 cP