MD® 200 Series UV/LED Catheter Adhesive
MD® 200 Series UV/LED Catheter Adhesive
SKU:MDC-04b8ae
Fast-curing MD® 200 Series UV/LED adhesive for catheter assembly, meets ISO 10993 standards, offers easy verification, and biocompatible bonding.
Regular price
$49.99
Regular price
Sale price
$49.99
Unit price
per
Initiate Order
MD® 200 Series UV/LED Catheter Adhesive
$49.99
Quantity: 1
Claim Your Seller Account
MD® 200 Series UV/LED Catheter Adhesive
$49.99
Quantity: 1
Delivery via Maden
Expect your order to arrive on time.
Secure Payments
All orders are processed through a secure, PCI-compliant checkout.
The MD® 200 Series 11,000 Centipoise (cP) Nominal Viscosity CTH Adhesive is specifically designed for catheter assembly, bonding common substrates with rapid UV/LED light curing technology. This adhesive meets ISO 10993 standards, allowing compatibility with EtO, E-Beam, and gamma sterilization methods. Offering See-Cure, Ultra-Red®, or Encompass® technologies, it ensures easy verification and inspection. With one-part formulations, no mixing required, and secondary heat-cure capability for shadow areas, this adhesive guarantees fast, reliable, and biocompatible bonding for medical devices.
Ready to Grow Without Cash Flow Constraints?
Product Specifications
Additional Information 0
Dymax® MD® Adhesives, specially formulated for disposable medical device assembly, are used in a wide range of applications including catheter, syringe, anesthesia mask, reservoir, tube set, and medical electronics assembly. They help optimize assembly speeds to enable faster processing, greater output, and lower processing costs while allowing for 100% in-line inspection of bond lines. All of our adhesives are no solvents added and meet both USP Class VI and ISO 10993 biocompatibility standards.MD® adhesives are intended for use in short-term (<29 days) or single-use disposable-device applications only. Dymax® does not authorize their use in long-term implant applications. In all cases, it's the user's responsibility to determine and validate the suitability of these adhesives in the intended medical device.Compatible sterilization methods include gamma irradiation and ethylene oxide. Sterilization by autoclaving may be limited to certain applications. It remains the user's obligation to ascertain the effect of sterilization on the cured adhesive.Cure in seconds with UV/Visible/LED lightNo solvents addedOne-part formulations and no mixingISO 10993 and other biocompatible approvalsFormulations with See-Cure, Ultra-Red®, or Encompass® technologiesSecondary heat-cure capability for shadow areasBond a broad range of substrates including Nylon 12 and PEBA
Available Grades Fluorescing
Blue
Available Grades Rheology
Thixotropic
Cured Mechanical Properties Durometer Hardness
D80
Cured Mechanical Properties Elongation At Break
8 %
Cured Mechanical Properties Modulus Of Elasticity
550 MPa | 80,000 psi
Cured Mechanical Properties Tensile At Break
28 MPa | 4,100 psi
Limited Applications Limited Applications
Polyamide (Nylon 6/6) (PA) | Polyetherimide (PEI) | Polyurethane (PU) | Styrene-Acrylonitrile (SAN)
Note 0
Individual Product Data Sheets (PDS) list complete test data, with copies of test reports available upon request.
Recommended Adhesives Recommended Adhesives
Acrylonitrile-Butadiene-Styrene (ABS) | Nickel Titanium (NiTi) | Polyether Block Amide (PEBA) | Polystyrene (PS) | Polysulfone (PSU)
Recommended Substrates Recommended Substrates
Acrylonitrile Butadiene Styrene (ABS) | Nickel Titanium (NiTi) | Polystyrene (PS) | Polysulfone (PSU)
Uncured Properties Nominal Viscosity
11,000 cP