MD® 200 Series UV/Visible CTH Adhesive for Catheter Assembly
MD® 200 Series UV/Visible CTH Adhesive for Catheter Assembly
SKU:MDC-ba3e83
Fast-curing MD® 200 Series UV/Visible adhesive for catheter assembly with ISO 10993 compliance
Regular price
$39.99
Regular price
Sale price
$39.99
Unit price
per
Initiate Order
MD® 200 Series UV/Visible CTH Adhesive for Catheter Assembly
$39.99
Quantity: 1
Claim Your Seller Account
MD® 200 Series UV/Visible CTH Adhesive for Catheter Assembly
$39.99
Quantity: 1
Delivery via Maden
Expect your order to arrive on time.
Secure Payments
All orders are processed through a secure, PCI-compliant checkout.
Enhance catheter assembly with the MD® 200 Series UV/Visible CTH Adhesive that cures in seconds under light. This adhesive bonds common substrates like ABS, PA, stainless steel, and aluminum, meeting ISO 10993 standards and compatible with sterilization methods. Featuring See-Cure, Ultra-Red®, or Encompass® technologies, it offers easy verification of placement, cure, and inspection, ideal for applications like balloon bonding and Y-connectors. With no mixing required, this adhesive is biocompatible, fast-curing, and suitable for short-term disposable medical devices.
Ready to Grow Without Cash Flow Constraints?
Product Specifications
Additional Information 0
Dymax® MD® Adhesives, specially formulated for disposable medical device assembly, are used in a wide range of applications including catheter, syringe, anesthesia mask, reservoir, tube set, and medical electronics assembly. They help optimize assembly speeds to enable faster processing, greater output, and lower processing costs while allowing for 100% in-line inspection of bond lines. All of our adhesives are no solvents added and meet both USP Class VI and ISO 10993 biocompatibility standards.MD® adhesives are intended for use in short-term (<29 days) or single-use disposable-device applications only. Dymax® does not authorize their use in long-term implant applications. In all cases, it's the user's responsibility to determine and validate the suitability of these adhesives in the intended medical device.Compatible sterilization methods include gamma irradiation and ethylene oxide. Sterilization by autoclaving may be limited to certain applications. It remains the user's obligation to ascertain the effect of sterilization on the cured adhesive.Cure in seconds with UV/Visible/LED lightNo solvents addedOne-part formulations and no mixingISO 10993 and other biocompatible approvalsFormulations with See-Cure, Ultra-Red®, or Encompass® technologiesSecondary heat-cure capability for shadow areasBond a broad range of substrates including Nylon 12 and PEBA
Available Grades Fluorescing
Ultra-Red®
Available Grades Rheology
Thixotropic
Cured Mechanical Properties Durometer Hardness
D55
Cured Mechanical Properties Elongation At Break
300 %
Cured Mechanical Properties Modulus Of Elasticity
105.4 MPa | 15,300 psi
Cured Mechanical Properties Tensile At Break
11 MPa | 1,600 psi
Note 0
Special ViscosityUltra-Red® (Patented Fluorescing Technology)See-Cure (Patented Color-Change Technology)Individual Product Data Sheets (PDS) list complete test data, with copies of test reports available upon request.
Recommended Adhesives Recommended Adhesives
Acrylonitrile-Butadiene-Styrene (ABS) | Polyamide (Nylon 12) (PA) | Polycarbonate (PC) | Polyether Block Amide (PEBA)
Recommended Substrates Recommended Substrates
Acrylonitrile Butadiene Styrene (ABS) | Nylon 12 | Polycarbonate (PC) | Polyether Block Amide (PEBA) | Thermoplastic Polyurethane (TPU)
Uncured Properties Nominal Viscosity
1,100 cP