MINCO CT16A Dual Display PID Controller
MINCO CT16A Dual Display PID Controller
SKU:MIN-4d5c6d
Precise temperature control with dual displays, versatile inputs/outputs, and advanced features for efficient regulation.
Regular price
$399.99
Regular price
Sale price
$399.99
Unit price
per
Initiate Order
MINCO CT16A Dual Display PID Controller
$399.99
Quantity: 1
Claim Your Seller Account
MINCO CT16A Dual Display PID Controller
$399.99
Quantity: 1
Delivery via Maden
Expect your order to arrive on time.
Secure Payments
All orders are processed through a secure, PCI-compliant checkout.
The MINCO CT16A Dual Display PID Controller offers precise temperature control in a compact 1/16DIN enclosure. With a wide range of control modes, sensor input types, and versatile outputs, it is ideal for Thermofoil™ heaters and other electronics. Featuring dual displays, loop break protection, fuzzy logic, self-tuning capability, alarm options, and more, this controller ensures accurate and efficient temperature regulation. Its waterproof front panel and security features make it suitable for various applications, while the optional communication interfaces enhance connectivity and data management.
Product Specifications
Specifications Accuracy
±0.25% of span ±1 count.
Specifications Ambient Operating Temperature
-10 to 55 ºC | 14 to 131 ºF
Specifications Control Action
Reverse (usually heating) or Direct (usually cooling), selectable.
Specifications Cycle Rate
1 to 80 seconds.
Specifications Display
Two, 4 digit, 7 segment, 0.3" high LEDs. Process Value red, Setpoint Value green. °C or °F
Specifications Isolation
Process output (options 934, 936): 500 VAC to all other inputs and outputs. | Relay and SSR: 1500 VAC to all other inputs and outputs. | SP1 and SP2 current and voltage: 500 VAC to all other inputs and outputs, but not isolated from each other.
Specifications Line Voltage Stability
±0.05% over supply voltage range.
Specifications Loop Break Protection
Error message is initiated and output is turned off in case of shorted sensor or open heater circuit. Break time adjustable from OFF to 9999 seconds.
Specifications Memory Backup
Non-volatile memory (no batteries required).
Specifications Rampsoak
(CT16A3 only) 16 separate ramp and soak times are adjustable in minutes or seconds from 0 to 9999. When the program has ended, you may choose to repeat, hold, revert to local setpoint, or turn the outputs off.
Specifications Resolution
1° or 0.1°, selectable.
Specifications Sensor Break Or Short Protection
Selectable output: disabled, average output before fault, or preprogrammed output. Adjustable delay: 0.0 to 540.0 minutes.
Specifications Sensor Inputs
Selectable inputs:RTD: 2 or 3-wire, Minco typesPD or PE (100 O EN60751 platinum)PA (100 O NIST platinum)PF (1000 O EN60751 platinum), or NA (120 O Nickel).Thermocouple:Type J (factory default), K, T, L, E, R, S, B, C, or N.DC current: 0-20 mA or 4-20 mA (use with Temptran⢠transmitters).DC voltage: 0-10 or 2-10 VDC, -10 to 10 mVDC, scalable.
Specifications Sensor Input Type
Resistance Temperature Detector (RTD) | Thermocouple | Current | Voltage
Specifications Setpoint Range
Selectable from -212 to 2320°C (-350 to 4208°F), input dependent.
Specifications Supply Voltage
100 to 240 VAC nom., +10/-15%, 50 to 400 Hz, single phase; 132 to 240 VDC, nom., +10/-20%. 5 VA maximum. | Note: Do not confuse controller power with heater power. The controller does not supply power to the heater, but only acts as a switch. For example, the controller could be powered by 115 VAC, but controlling 12 VDC to the heater.
Specifications Temperature Stability
µV/°C (2.3 µV/°F) typical | 8 µV/°C(4.5 µV/°F) max. (100 ppm/°C)
Specifications Transmitter Type
Dual Display Proportional Integral Derivative (PID) Controller