THERMOSEAL® M22 Dry Moldable Refractory Material
THERMOSEAL® M22 Dry Moldable Refractory Material
SKU:THE-d6723e
High-temp refractory material for diverse applications, featuring superior density and easy application.
Regular price
$89.99
Regular price
Sale price
$89.99
Unit price
per
Initiate Order
THERMOSEAL® M22 Dry Moldable Refractory Material
$89.99
Quantity: 1
Claim Your Seller Account
THERMOSEAL® M22 Dry Moldable Refractory Material
$89.99
Quantity: 1
Delivery via Maden
Expect your order to arrive on time.
Secure Payments
All orders are processed through a secure, PCI-compliant checkout.
THERMOSEAL® M22 Dry Moldable is a high-temperature resistant refractory material ideal for cathode bar sealing, molten aluminum transfer trough linings, furnace repair, and fireplace applications. With a use temperature limit of 1260 ºC | 2300 ºF, this dry mix offers superior wet density and fired density, easy application, and durable fired silica and alumina composition. Custom formulations available. Shelf stable for up to 12 months.
Ready to Grow Without Cash Flow Constraints?
Product Specifications
Additional Information Additional Information
The Final Barrier against Abrasion, Chemicals and Heat
Applications 0
THERMOSEAL® M22 Dry Moldable can be applied with the fingers, trowels, or spatulas, and is easily formed to any contour or readily pressed into cracks and smoothed out. Water wet the tool to facilitate smoothing and contouring. Drying consists of removing the liquid portion of the mix usually by use of anexternal heat source at 200 - 220°F 93 - 104°C for approximately six hopurs per inch of thickness.
Average Physical Properties Appearance
Dry Fibers
Average Physical Properties Color
Off-White
Average Physical Properties Consistency
Dry Mix
Average Physical Properties Dry Density At 250 Degree Fahrenheit
23 lb/ft³
Average Physical Properties Fired Alumina
45 %
Average Physical Properties Fired Density At 2300 Degree Fahrenh
21 lb/ft³
Average Physical Properties Fired Silica
52 %
Average Physical Properties Linear Shrinkage At 2000 Degree Fahr
3 %
Average Physical Properties Materials
Moldable
Average Physical Properties Use Temperature Limit
1260 ºC | 2300 ºF
Average Physical Properties Wet Density
76 lb/ft³
Average Physical Properties Wet Density Tolerance
5 %
Average Physical Properties Wet Solids Content
100 %
Handling Information Handling Information
A Material Safety Data Sheet has been issued describing the health, safety and environmental properties of this product, identifying the potential hazards and giving advice on handling precautions and emergency procedures.
Note 0
Tolerance is ± 10% unless otherwise noted.The technical data presented herein are indicative of representative properties and are intended as a specification guide only.No warranties are expressed or implied as application conditions are beyond our control.
Packaging 0
50 pound bags, special packaging available upon request.
Preparation Preparation
THERMOSEAL® M22 DRY MOLDABLE can be custom formulated to meet specific application criteria. Mix with water in a ratio of one part dry moldable to two parts water in weight, and agitating until the consistency resembles smooth putty. Small batches can be mixed by hand, however a cement or paddle mixer is recommended for large batches. Overmixing is not recommended.
Shelf Life And Storage Shelf Life And Storage
THERMOSEAL® M22 Dry Moldable can be stored for up to 12 months if kept unopened in cool, dry conditions.
Uses 0
Trough linings for molten metal transfer, high temperature sealing and coating, light weight refractory shape manufacture, trough coating and patching and furnace patching.