XLERATOR Microban Wall Guard
XLERATOR Microban Wall Guard
SKU:XLE-f6d6a2
Protect your walls with the XLERATOR Microban Wall Guard. Easy to install, durable materials, and enhanced hygiene.
Regular price
$89.99
Regular price
Sale price
$89.99
Unit price
per
Initiate Order
XLERATOR Microban Wall Guard
$89.99
Quantity: 1
Claim Your Seller Account
XLERATOR Microban Wall Guard
$89.99
Quantity: 1
Delivery via Maden
Expect your order to arrive on time.
Secure Payments
All orders are processed through a secure, PCI-compliant checkout.
Upgrade your XLERATOR hand dryer with the XLERATOR Microban Wall Guard for superior wall protection. Made of Microban anti-microbial plastic in White, Black, or brushed stainless steel, this guard is 31-3/4in wide, 15-3/4in high, and 1/16in deep. Easy installation with 3M adhesive tape. Keep your walls clean and hygienic while enhancing the longevity of your hand dryer.
Ready to Grow Without Cash Flow Constraints?
Product Specifications
Specifications Cleaning Instructions
Clean the installed Wall Guard with mild soapy water and a soft cloth. Mild dish soap mixed with water in a spray bottle works best.DO NOT USE any cleaner that contains any ammonia or abrasive cleansers to clean the surface.
Specifications Depth
1/16 in
Specifications Height
15-3/4 in
Specifications Installation
Mounted with 4 strips of construction grade 3M adhesive tape
Specifications Installation Instructions
Clean the wall surface with ISOPROPYL ALCOHOL prior to installation and make sure that the surface is dry and free of any dust and debris.Center the Wall Guard underneath the hand dryer so that the top of the Wall Guard is 1 Inch (in) below the bottom of the dryer.Carefully measure and mark the wall surface for placement of the Wall Guard with a pencil or temporary marker.Four strips of double-sided adhesive are included for each panel. Apply the tape strips to textured side of black or white panel and smooth side of brushed stainless panel as follows:Lay out tape strips according to illustration at left.Remove one strip and apply to either right or left side to start.Press each tape strip firmly onto the plastic as it is applied.Continue until all 4 strips are applied.Note: Alignment is critical. Once placed on the wall, the Wall Guard cannot be re-positioned.Align the top edge of the Wall Guard with the markings on the wall and firmly press into place against the entire surface of the Wall Guard.Optional: After guard is applied to the wall you may add silicone sealant around the edge.
Specifications Material
Microban® anti-microbial plastic: White or Black or brushed stainless steel
Specifications Quantity Per Set
2
Specifications Width
31-3/4 in